This site is supported by our readers. We may earn a commission, at no cost to you, if you purchase through links.
Struggling with Juki sewing machine problems? You’re not alone. Learn common causes and solutions to common Juki sewing machine issues with this troubleshooting guide.
Stitches are skipping
- Cause: The needle is not properly inserted into the needle bar.
- Solution: Remove the needle and reinsert it, making sure that it is fully seated in the needle bar.
- Cause: The needle is bent or dull.
- Solution: Replace the needle with a new one.
- Cause: The thread is not threaded correctly.
- Solution: Rethread the machine, making sure that the thread is going through all of the necessary guides.
- Cause: The tension is too high or too low.
- Solution: Adjust the tension until the stitches are forming properly.
The machine is not picking up the bobbin thread
- Cause: The bobbin case is not properly inserted into the machine.
- Solution: Remove the bobbin case and reinsert it, making sure that it is fully seated in the machine.
- Cause: The bobbin thread is not properly wound onto the bobbin.
- Solution: Rewind the bobbin, making sure that the thread is going in the correct direction.
- Cause: The bobbin thread is tangled.
- Solution: Untangle the bobbin thread and reinsert it into the bobbin case.
The machine is making a loud noise
- Cause: The machine is not properly lubricated.
- Solution: Lubricate the machine according to the manufacturer’s instructions.
- Cause: The machine is not properly threaded.
- Solution: Rethread the machine, making sure that the thread is going through all of the necessary guides.
- Cause: The machine is not properly adjusted.
- Solution: Adjust the machine according to the manufacturer’s instructions.
The machine is not sewing
- Cause: The machine is not plugged in or turned on.
- Solution: Plug in the machine and turn it on.
- Cause: The machine is not in the correct stitch mode.
- Solution: Make sure that the machine is in the correct stitch mode for the stitch that you are trying to sew.
- Cause: The machine is not threaded correctly.
- Solution: Rethread the machine, making sure that the thread is going through all of the necessary guides.
- Cause: The machine is not lubricated properly.
- Solution: Lubricate the machine according to the manufacturer’s instructions.
- Cause: The machine is not adjusted properly.
- Solution: Adjust the machine according to the manufacturer’s instructions.
Table Of Contents
Key Takeaways
- Stitches skipping: Make sure the needle is properly inserted, not bent or dull, and the thread is threaded correctly.
- Machine not picking up bobbin thread: Make sure the bobbin case is properly inserted, the thread is wound correctly, and the thread is not tangled.
- Machine making a loud noise: Make sure the machine is properly lubricated, threaded, and adjusted.
- Machine not sewing: Make sure the machine is plugged in and turned on, in the correct stitch mode, threaded correctly, and lubricated properly.
Stitching Issues
Stitching problems are common with Juki sewing machines, but they can be easily troubleshooted and resolved.
- Loose top tension:
- If your stitches are loose, the top thread may be too loose.
- To tighten the top tension, turn the tension dial clockwise.
- Bobbin thread showing:
- If you can see the bobbin thread on the top of your fabric, the bobbin tension may be too loose.
- To tighten the bobbin tension, turn the tension dial counterclockwise.
- Metallic top thread:
- If you see metallic-looking top thread on the back of your fabric, the top thread may be too tight.
- To loosen the top tension, turn the tension dial counterclockwise.
- Skipped stitches:
- If your stitches are skipping, the needle may be the wrong size or type for the fabric you’re using.
- Make sure you’re using the correct needle for your fabric and thread.
- Thread shredding:
- If your thread is shredding, the needle may be dull or damaged.
- Replace the needle with a new one.
- Bobbin thread bunching or tangling:
- If your bobbin thread is bunching or tangling, the bobbin may not be inserted correctly.
- Make sure the bobbin is inserted correctly and that the bobbin tension is set correctly.
- Feed dogs not working properly:
- If the feed dogs aren’t working properly, your fabric may not be feeding evenly under the needle.
- Clean the feed dogs and make sure they’re free of debris.
Power and Functionality
Having trouble with your Juki sewing machine? If your machine isn’t turning on, the bobbin winder isn’t working, or it’s stuck in reverse, you’ve come to the right place. This troubleshooting guide will help you identify and fix the problem so you can get back to sewing.
Check the power switch and connection.
- Make sure that the power switch is turned on and that the machine is plugged into an outlet that’s working properly.
Address potential electrical issues.
- If your machine is still not turning on, check for any loose or damaged wires.
- You may also want to try resetting the circuit breaker or unplugging the machine for a few minutes and then plugging it back in.
Evaluate the foot pedal and wiring.
- If your bobbin winder isn’t working, the problem may be with the foot pedal or the wiring.
- Try replacing the foot pedal or checking the wiring for any damage.
Consider professional repair.
- If you’ve tried all of the above troubleshooting steps and your machine is still not working, you may need to take it in for professional repair.
Needle and Thread Problems
In addition to power and functionality problems, needle and thread issues can also arise with your Juki sewing machine.
- Needle threader malfunction
- Incorrect needle size or type
- Thread shredding due to tight tension
- Metallic top thread visible on the back of the project
To troubleshoot these issues, you can:
- Review your threading process.
- Assess the needle condition and thread thickness.
- Inspect the thread hook and needle position.
- Reinsert or replace the needle as needed.
Machine Stuck in Reverse
If your Juki sewing machine is stuck in reverse, troubleshooting the issue can help you get back to sewing quickly.
First, check computerized issues like the speed controller or timing.
Then, focus on feed dog functionality and maintain records for maintenance.
Timing Adjustment
**
- Check other underlying issues.
- Conduct timing tests.
- Adjust needle bar and shuttle hook.
Once you’ve made these adjustments, reassemble and maintain your machine according to the manufacturer’s instructions.
Foot Pedal Problems
If your Juki sewing machine foot pedal isn’t working, you can troubleshoot the issue by:
- Inspecting the wiring or power cord.
- Evaluating the speed controller.
- Considering a replacement.
If you have an electronic foot pedal, check for damage to the wiring or power cord.
If you have a mechanical foot pedal, check for damage to the pedal itself or the connecting rod.
If you’ve ruled out wiring or pedal damage, you can try evaluating the speed controller.
If the speed controller isn’t functioning properly, you may need to replace it.
You can find replacement foot pedals and speed controllers for Juki sewing machines on Juki’s download page.
Repair Manual and Spare Parts
If you need a repair manual or spare parts for your Juki sewing machine, you can find them from a variety of sources.
- Juki offers manuals for download on their website.
- You can also find them from alternative sources like Amazon and eBay.
- You can also find specific model availability and locate spare parts online or with local shops.
- If you have a vintage machine, you may need to do some research to find parts that are compatible.
Common Causes & Solutions
Incorrect settings for fabric and thread can lead to problems with your Juki sewing machine.
Make sure to:
- Adjust the tension dial and bobbin tension as necessary.
- Use the correct needle size and type for your fabric.
- Properly place the bobbin and adjust the tension.
Regular cleaning and maintenance will help your machine perform optimally.
3 Discussion Points**
Before you begin sewing, make sure your Juki sewing machine is properly set up and adjusted for the fabric and thread you’ll be using.
Common causes of problems include:
- Incorrect needle size/type
- Incorrect thread tension
- Dirty machine
* Incorrect Needle Size/Type
One common cause of sewing machine problems is using the incorrect needle size or type.
This can lead to:
- Bobbin thread showing
- Skipped stitches
- Incorrect thread tension
Make sure to use the correct needle type for your fabric weight.
* Incorrect Thread Tension
Have you been experiencing issues with your Juki sewing machine’s thread tension? Here are 3 common causes:
- tight top tension
- bobbin thread showing
- uneven stitches
Learn how to adjust your tension for balanced stitches.
* **Dirty Machine
A dirty machine can cause problems with stitching.
Clean your machine regularly with a lint brush, oil, and degreaser to remove rust, lint, and oil.
Tips for Preventing Problems
In addition to the solutions listed above, there are a few things you can do to prevent problems with your Juki sewing machine:
- Use the correct needle for your fabric.
- Clean your machine regularly.
- Oil your machine regularly.
- Maintain correct tension.
- Avoid using heavy fabrics.
By following these tips, you can help keep your Juki sewing machine in good working order and avoid costly repairs.
Frequently Asked Questions (FAQs)
Why is my Juki sewing machine making a loud noise?
Your Juki sewing machine is making a loud noise because the needle is hitting the throat plate.
To fix this,
- Lower the presser foot.
- Raise the needle.
Why is my Juki sewing machine not sewing straight?
Troubleshoot your Juki sewing machine that isn’t sewing straight with a crooked stitch plate, incorrect needle size or type, or dirty machine.
- Crooked stitch plate
- Check to make sure the stitch plate is properly aligned with the needle bar.
- If the stitch plate is crooked, you can try to straighten it by gently bending it back into place.
- If you are unable to straighten the stitch plate, you will need to replace it.
- Incorrect needle size or type
- Make sure you are using the correct size and type of needle for your sewing machine.
- The needle size is typically printed on the needle itself.
- The needle type is typically indicated by a letter or number.
- For example, a universal needle is typically indicated by the letter U.
- If you are unsure what size or type of needle to use, consult your sewing machine manual.
- Dirty machine
- Make sure your sewing machine is clean and free of lint and dust.
- To clean your sewing machine, you can use a soft brush or cloth to remove any lint or dust from the machine.
- You can also use a vacuum cleaner to remove any loose lint or dust.
Why is my Juki sewing machine skipping stitches?
Your Juki sewing machine is skipping stitches because the tension is too tight.
Loosen the tension slightly and try again.
Why is my Juki sewing machine jamming?
Your Juki sewing machine is jamming because:
- The bobbin thread is tangled.
- The needle is bent.
- The tension is incorrect.
To troubleshoot, check the bobbin area, replace the needle, and adjust the tension.
Why is my Juki sewing machine not bobbin winding?
Your Juki sewing machine isn’t bobbin winding because:
- The bobbin winder isn’t engaged.
- The bobbin case isn’t properly inserted.
- The bobbin isn’t threaded correctly.
Conclusion
Fret not, fellow sewist, for your Juki sewing machine woes are no match for our troubleshooting tips.
