This site is supported by our readers. We may earn a commission, at no cost to you, if you purchase through links.
To hem linen pants and curtains, start by measuring and marking the desired hem length on the fabric. Pin or tape the fabric along the hemline, depending on your preference and the weight of the fabric. For linen, you may find it easier to use a no-sew tape for a quick and easy option.
Once the panels are removed from the rod, prepare to sew by choosing a sharp needle, medium-sized thread, and setting your sewing machine to a straight stitch. Select an appropriate hemmed technique, such as pinning or taping, and sew the hem with even stitches.
Finish with decorative stitches and gently iron the hem to create a crisp edge. By following these steps, you’ll achieve a professional-looking hem for your linen pants and curtains.
Table Of Contents
Key Takeaways
- Measure and mark the desired hem length on the fabric, using a pen or pencil for accuracy, and choose a hemming technique that suits the fabric weight and your personal preference, such as pinning for lightweight fabrics like linen or using no-sew tape for a quick and easy option.
- Remove the curtain panels from the rod and lay them flat on a clean surface before beginning the hemming process, ensuring that the fabric is smooth and ready for sewing or applying hem tape.
- When sewing, use a sharp, medium-sized needle and set the sewing machine to a straight stitch, making sure to select the right thread color to match the fabric and maintain even stitches for a professional finish.
- If opting for a no-sew method, apply iron-on hem tape to the fabric, ensuring the tape is properly heated and bonded to the fabric, and finish by gently ironing the hem to create a crisp edge.
How to Hem Linen Pants Curtains?
To hem linen pants and curtains, you can use a no-sew method that involves folding and taping the fabric. Here’s a step-by-step guide:
- Open up your linen pants or curtains and fold the bottom inch of the fabric upwards.
- Iron the hem to ensure it stays in place.
- Pin the folded hem in place using stick pins or fabric tape.
- Remove the pants or curtains from the rod or hanger.
- Prepare to sew by cutting a piece of thread between 10 and 12 inches long and dampening one end.
- Thread the needle and tie a knot at the end.
- Sew along the folded edge of the hem, being careful not to go over the pins or tape.
- Once you’ve sewn the entire hem, remove the pins or tape.
- Press the hem with an iron to ensure it lays flat.
For linen pants, you may also want to consider using a sewing machine or hand-sewing needle for a more polished look. Remember to remove the original hem before measuring and hemming the new length.
Measure and Mark the Hem
To measure the hem of your curtains or linen pants, follow these steps:
- Choose the desired length for your hem. This could be a slight float, kiss, or puddle, depending on your preference and the type of fabric you’re working with.
- Mark the hemline on your fabric using a pen or pencil.
- If you prefer a no-sew option, apply heat-n-bond tape along the hemline. Make sure the tape is evenly distributed and covers the entire hem.
- If you’re sewing the hem, pin the fabric along the hemline using straight pins. This will help hold the fabric in place while you sew.
- Once you’ve marked and pinned the hem, you can begin sewing. Use a sewing machine with a thread that matches the color of your fabric.
- Sew the hem in place, ensuring a consistent stitch length for easier removal if needed.
- After sewing, gently iron the hem to remove any wrinkles or creases.
Remember to use high-quality heat-n-bond tape for a strong bond, and make sure the fabric is clean and dry before applying the tape. Use a ruler or measuring tape for a straight hemline, and let the tape cool completely before handling to prevent any damage or discomfort.
Pin or Tape the Fabric in Place
Now that you’ve marked the hem length, it’s time to pin or tape the fabric in place. If you’re using pins, place them at an angle to the fold, with the point facing down. This will help prevent the fabric from unraveling. If you’re using tape, consider using a no-sew tape for a quick and easy option.
Tape vs. pins? It depends on the fabric weight and your personal preference. For lightweight fabrics like linen, pins might be more suitable. For heavier fabrics, tape could be a better choice. Remember to follow the manufacturer’s instructions for the tape, and always test it on a small area first.
For curtain panels, you might need to fold the fabric first, then pin or tape the fold in place. This will ensure a neat and even hem. Don’t forget to measure the seam allowance to make sure the hem is in the right place.
Happy hemming!
Remove the Panels From the Rod
To remove your curtains from the rod, you’ll need to follow these steps:
- Determine the rod placement: Most experts recommend hanging curtains high and wide, with the rod placed at least 3-4 inches below the ceiling or, if there’s crown molding, at the top of the window trim.
- Remove the panels: Use a step stool or ladder to reach the curtains on the rod. Carefully slide the panels off the rod and place them on a clean, well-lit workspace.
- Prepare to sew: Once the panels are off the rod, you can begin preparing to sew the hem. This may involve pinning or taping the fabric in place, marking the hem line, and cutting a piece of thread for sewing.
Prepare to Sew
After removing the panels from the rod, it’s time to gear up for the main event: sewing. First things first**, let’s talk thread. Opt for a color that’s a close match to your curtains—like a chameleon, it should blend right in.
Now, needle type is no trivial matter; a sharp, medium-sized needle will pierce through linen like a hot knife through butter. Before you rev up the sewing machine, double-check those settings. A straight stitch with a moderate tension will do the trick.
And remember, a generous seam allowance is your safety net—don’t skimp on it. If you’re using interfacing for a crisp edge, iron it on now. Get that curtain hemmed, press it like you mean it, and let’s make that curtain stitch legendary. No pressure, but your curtain’s fate is in your hands—steady as she sews!
Sew the Hem in Place
Now that you’ve marked and pinned your hem, it’s time to sew it in place. Here are the steps to follow:
- Choose the right hemmed technique for your fabric thickness.
- Select the appropriate needle and thread tension for your project.
- Sew the hem in place, taking care to keep your stitches even and consistent.
- Finish off with a few decorative stitches for a personal touch.
Gently Iron the Hem
To hem curtains using iron-on hem tape, follow these steps:
- Measure and mark the desired hem length on the curtain.
- Remove the curtains from the rod and lay them flat on a clean surface.
- Prepare the iron-on hem tape by cutting it to the appropriate length and removing any paper backing.
- Fold the hem of the curtain to the desired width and press it with an iron, ensuring the fabric is smooth and free of wrinkles.
- Apply the iron-on hem tape to the folded hem, with the adhesive side facing the fabric. Press the iron onto the tape, following the manufacturer’s instructions for heat settings and pressure.
- Allow the hem tape to cool and set before handling it.
- Carefully trim any excess tape or fabric from the hem.
Frequently Asked Questions (FAQs)
What is the best method to hem linen pants curtains without sewing?
To hem linen pants curtains without sewing, you can use iron-on hem tape. Here’s a step-by-step guide on how to do it:
- Purchase iron-on hem tape that’s suitable for linen or a similar fabric. Regular weight hem tape works well for lighter fabrics like sheers, faux silks, and voiles, while extra hold weight is recommended for heavier fabrics like cottons and blends, linens, and faux-linens.
- Measure the length of your curtains and mark the fabric at the desired length. Fold the fabric over at the mark and pin it in place.
- Apply the iron-on hem tape to the raw edge of the back/bottom of the curtain, making sure the sticky side is facing down. Press the iron gently over the tape to activate the glue, which will turn transparent when heated.
- Fold the hem and iron. Measure 1 inch of the raw edge and fold up, creating a sandwich with the layers of fabric on the outside and the hem tape in the middle. Turn the heat on your iron almost all the way up and begin to iron slowly, fusing the fabric by melting the hem tape to hold the folded-up hem in place.
- Once you reach the end of the curtain seam, there may be a little bit of excess fabric poking out from each side. Use your fabric shears to cut it down at an angle, just so it doesn’t hang out from the back of the curtain.
Remember to use a medium setting on your iron without steam and press the iron-on tape onto the raw edge of the back/bottom of the curtain. Be sure to press in with the iron and go slowly to guarantee the tape melts enough to stick.
How do I measure the hem on my linen pants curtains?
To measure the hem on your linen pants curtains, follow these steps:
- Hang the curtains on the rod, making sure they’re straight and evenly spaced.
- Use pins or a marker to mark the desired hem length on the curtain, keeping in mind the desired length you want the curtains to hang from the rod.
- Remove the curtains from the rod and lay them flat on a heat-safe surface, such as an ironing board.
- Fold the bottom of the curtain up along the pin line you marked, pinning it in place along the top of the hem.
- Iron the hem fold to create a neat crease, using steam as necessary.
- Sew the hem in place using a sewing machine, starting about 1/8 to 1/4 in from the finished edge. You can use coordinating thread for a seamless look.
Remember to follow the manufacturer’s instructions for the fusing tape and make sure the hem is bonded properly before hanging your curtains.
What tools do I need to hem linen pants curtains without sewing?
To hem linen pants curtains without sewing, you’ll need:
- Fabric glue
- Scissors
- Ruler
- Iron
- Ironing board
- Seam ripper (optional)
- Pencil or chalk
- Pins
If necessary, remove existing hem stitching with a seam ripper. Mark measurements with a pencil or chalk and hold everything in place with pins while working.
How do I attach the no-sew tape to the hem of my linen pants curtains?
To attach no-sew tape to the hem of your linen pants curtains, follow these steps:
- Measure and mark the desired length of the hem on the curtain fabric.
- Cut the no-sew tape to the same length as the hem.
- Place the tape along the hemline, making sure it’s evenly spaced.
- Cover the tape with a cloth to protect your iron from the adhesive.
- Run a heated hair straightener over the cloth to activate the tape’s adhesive.
- Hold the hair straightener in place for several seconds to ensure the tape bonds to the fabric.
- Allow the tape to cool completely before handling the curtain.
Remember to use high-quality no-sew tape and make sure the fabric is clean and dry before attaching the tape. You can also use a ruler or measuring tape for a straight hemline.
Can I use a different type of tape for hemming linen pants curtains without sewing?
To hem linen pants curtains without sewing, you can use iron-on hem tape. This type of tape is specifically designed for hemming curtains and can be easily applied using an iron. Here’s a step-by-step guide:
- Cut the iron-on hem tape to the desired length.
- Fold the hem of the linen pants curtains to the desired height.
- Lay the iron-on hem tape along the folded edge of the curtain, ensuring that the sticky side is facing down.
- Cover the tape with a damp cloth to prevent scorching.
- Apply heat from an iron with a medium setting (no steam) to the tape, pressing it down onto the curtain fabric.
- Remove the paper backing from the top of the tape, leaving a clear residue on the curtain.
- Fold the hem up to the desired height and press it down with the iron, fusing the fabric to the tape.
- Repeat the process for the other side of the curtain.
Remember to follow the manufacturer’s instructions for the specific iron-on hem tape you’re using, as different tapes may require different settings or techniques.
Conclusion
Question: Ready to make your linen pants and curtains look like a million bucks? With a few simple steps, you can achieve a professional-looking hem that will elevate your home and wardrobe.
Start by measuring and marking the desired hem length, then pin or tape the fabric in place. Remove the panels from the rod and prepare to sew using a sharp needle, medium-sized thread, and a straight stitch.
Sew the hem with even stitches, finish with decorative stitches**, and gently iron the hem to create a crisp edge. By following these steps, you’ll have a perfectly hemmed linen pants and curtains that will leave your guests in awe.
